Welcome to the Global Website

We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.

Go to Global

The three general equipment classifications for thermal processing equipment are:

  • batch,
  • semi-continuous,
  • and continuous.

Classification used depends upon the scope of production and the nature of the business. While the science behind heat treatment remains principally the same, certain advantages can be achieved from particular oven and furnace types. As an example it is possible to carry out the annealing process in air furnaces, vacuum furnaces, and gas purged retort furnaces, amongst others. Similarly the surface chemistry process of carburizing can be carried out in a range of equipment types including batch and continuous atmosphere controlled furnaces, pusher furnaces, or vacuum furnaces. The range of furnace types is extremely diverse. So, if the furnace equipment type does not define the process, why should there be so many different options for users to choose from? For example: Automotive gears have been hardened and tempered for many years in standard gas carburizing and draw furnaces. Recent advances in Low Pressure Carburizing for these components in a vacuum furnace have brought advantages to production cycle integration and component quality. Aircraft components can equally be annealed in gas purged retort furnaces or in vacuum furnaces. The distinction often lies in the stage of the process, with annealing of raw or core material being carried out under controlled atmospheres, while finished components are processed in vacuum where there is a much greater need to maintain control of components shape, dimension and surface finish as well the material properties.

Other issues that influence the choice of processing equipment include:

  • Captive shops: These are in-house processes usually carrying out work of a similar nature where continuous processes and large-scale batch processes can be most economically employed.
  • Commercial shops: Usually carry out a variety of work for external customers where batch production allows the flexibility required to meet the demands of a wide number of processes.
  • The desire to achieve the final finished product compliance without the need for further processing.
  • Physical size of the component.
  • Mixed batch production.
  • Reduced surface oxidation.
  • Final surface finish for wear, corrosion and fatigue resistance
  • Reduced component deformation.

Furnace Types

The following gives typical examples of furnace types, but this is by no means an exhaustive list:

  • Integral Quench Furnaces
  • Roller Hearth Furnaces
  • Rotary Hearth Furnaces
  • Atmosphere Furnaces – Carburising
  • Atmosphere Furnaces – General
  • Laboratory Furnaces
  • Shaker Hearth Furnaces
  • Lead Baths and Salt Baths
  • Batch Air Furnaces – General
  • Tempering or Draw Furnaces
  • Slot Forge
  • Bell – Top Hat Furnaces
  • Mesh Belt Furnaces
  • Soaking Pits & Pit Furnaces
  • Billet Furnace
  • Drop Bottom
  • Muffle Furnaces
  • Bogie Hearth Furnaces
  • Drum Rotating
  • Box Furnace
  • Dryers
  • Tip Up or Tilt Furnaces
  • Brazing Furnaces
  • Electric Resistance Furnace
  • Tool Room Furnaces
  • Brazing Atmosphere Furnaces
  • Elevator Hearth
  • Oil Fired Furnaces
  • Tube Furnaces
  • Burn Off Oven
  • Fluidized Bed Furnaces
  • Ovens General
  • Car Bottom Furnace
  • Forging
  • Pot Furnaces
  • Gantry Furnace
  • Plating & Galvanizing Lines
  • Vacuum Furnaces
  • Continuous Bright Annealing Furnace
  • Gas Fired General Purpose Furnaces
  • Pusher Furnaces
  • Conveyor Furnace
  • Radiant Tube Furnaces
  • Creep Test Furnace
  • Sealed Quench Furnaces
  • Cryogenic Vessels
  • Recuperative Furnaces
  • Walking Beam Furnaces
  • Diffusion Furnaces
  • Retort Furnaces
  • Walking Hearth Furnaces

The following gives typical examples of process types, but this is by no means an exhaustive list:

  • Aluminium Solution Treating
  • CarboNitriding
  • Annealing
  • Nitro-Carburizing
  • Aluminizing
  • Hot Isostatic Pressing
  • Tempering
  • Quenching
  • Austempering
  • Plasma ION Nitriding
  • Sintering
  • Martempering/Marquenching
  • Local Heat Treatment
  • Solution Annealing
  • Neutral Hardening
  • Strip Annealing
  • Nitriding General
  • Precipitation Hardening
  • Vacuum Brazing
  • Vacuum Carburizing
  • Carburizing
  • Vacuum Furnaces
  • Gas Nitriding
  • Vacuum High Pressure Gas
  • Quench
  • Flame Hardening
  • Homogenization
  • Gas Quench
  • Vacuum Low Pressure Carburizing
  • Diffusion Bonding
  • Gas Quench High Pressure
  • Reheating
  • Harden/Quench and Draw Temper

Product Selector

Package icon
Need help choosing the right product?

Our tool will match the best product to your needs

Launch product selector

Contact Us

close
close