Welcome to the Global Website

We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.

Go to Global

Diffusion Furnaces are tube furnaces used in the manufacturing process of semiconductor components. They are used to add doping impurities into high purity silicon wafers, thereby creating embedded semiconductor devices. This process occurs at high temperatures and demands a high degree of measurement accuracy and control stability.

Most diffusion furnaces have 3 heating zones along with some gas flow control loops. Additionally some processes are conducted under vacuum. Diffusion furnaces are installed in “Stacks”, which simply means they are mounted one above the other. A stack will usually have 4 or 5 furnaces, each requiring a 3 loop temperature controller.

2604/2704 Solution

  • Accurate control of 3 temperature loops with optional cascade
  • High resolution thermocouple inputs
  • Simple setpoint programming
  • Interface to gas controllers
  • Digital communications to supervisory software packages

A three loop 2604/2704 controller is used. Loop 1 controls the centre and loops 2 and 3 control the outer zones, control outputs are normally 4-20mA to thyristor units. The same program setpoint is used in all loops and the programmer also has the capability of generating additional setpoints for remote gas controllers.

Some applications require 3 cascade loops and this becomes possible by using the dual analogue input (DP) module together with external Action Instruments signal conditioners (For example Q488). Such a setup allows 6 analogue inputs, three of which are high precision thermocouple inputs along with 3 analogue outputs.

Product Selector

Package icon
Need help choosing the right product?

Our tool will match the best product to your needs

Launch product selector

Contact Us

close
close